A bunk bed sleeps two people in the floor space of one bed, which makes it the practical choice for a shared children's room or a small guest room. The top bunk needs a safety rail, a sound ladder and a mattress of the right depth. This guide covers sizes, safety and the checks that matter.
A bunk bed works well when the frame is rigid, the top rail is solid and the ladder is easy to climb. It is a shared-room solution, so the room layout and the ceiling height matter as much as the bed itself.
Best for
Two children sharing one bedroom.
Guest rooms and holiday homes where floor space is tight.
Watch out for
Top bunks without a full-length rail on the open side.
Ladders that are steep, narrow or not fixed to the frame.
Standard bunk bed sizes
Most bunk beds take two single mattresses, each 90 x 190 cm, stacked one above the other. The frame is usually about 100 cm wide and 200 cm long, and the top bunk sits about 150 to 170 cm off the floor. Some models take a small double on the bottom bunk, which suits an older child or a guest, but the top bunk is almost always a single.
The overall height is the measurement that catches people out. A bunk bed is usually 160 to 180 cm tall, and the sleeper on the top bunk needs enough headroom to sit up without hitting the ceiling. Measure the ceiling height and subtract the height of the top mattress to check the sitting space before ordering.
Safety rails on the top bunk
The top bunk needs a safety rail on every open side, and the rail should run the full length of the bed except for the gap where the ladder meets it. The rail should stand high enough above the mattress that a sleeper cannot roll over it, which is why mattress depth matters: a deep mattress raises the sleeper closer to the top of the rail.
Check that the rail is fixed to the frame with bolts, not just slotted in, and that it does not flex when you push it. The gap between the bars or slats of the rail should be narrow enough that a child cannot slip through. If the rail feels loose or moves, the bunk is not safe to use.
Pros
- Sleeps two in the space of one bed
- Frees floor space for play or a desk
- Some models split into two singles
Cons
- The top bunk needs a solid rail and ladder
- Ceiling height limits the top sleeper
- Making the top bed is awkward
Ladders and access
The ladder is the way up and down, several times a day, so it needs to be easy to climb in the dark. A ladder with flat treads is easier on bare feet than one with round rungs, and a ladder that is fixed to the frame is safer than one that leans against it. Some bunks have a staircase instead, which is easier to climb but takes more floor space.
Check that the ladder is firmly fixed and does not wobble when you climb it. The treads should be wide enough for a foot, and the top of the ladder should meet the top bunk at a height that is easy to step across from. If the ladder is steep, a child will struggle with it at night.
The top bunk is a bed with a drop beside it, so the rail is not a decoration. Check that it is solid, full length and fixed properly.
Wood and metal frames
Bunk beds are made from wood or metal, and both can be sound if the joints are well made. Wooden bunks are heavier and usually stiffer, which suits a bed that will be climbed on every day. Metal bunks are lighter and easier to move, but they need thicker tube and solid joints to stay rigid under the same use.
The joints matter more on a bunk than on an ordinary bed, because the frame takes sideways loads from climbing. Check that every joint is bolted and that the bolts can be tightened again. Push the frame from the side and watch for flex. A bunk that rocks when you push it will only get worse with use.
Mattress depth on a bunk
The mattress on the top bunk should be slim enough that the safety rail still stands well above the sleeper. A deep mattress raises the sleeper and reduces the effective height of the rail, which defeats its purpose. Most bunk manufacturers state a maximum mattress depth for the top bunk, and that limit should be followed.
The bottom bunk can take a normal single mattress, because there is no rail to clear. Both mattresses should fit the frame snugly, with no gap at the sides where a limb could slip through. Single beds explains mattress sizes and firmness for one sleeper.
Room layout and ceiling height
A bunk bed needs a room with enough ceiling height for the top sleeper to sit up, and enough floor space for the ladder and for making the beds. Mark the footprint on the floor before ordering, and check that the ladder side is clear of wardrobes and doors. The top bunk should not sit under a low ceiling light or a ceiling fan.
Also think about who sleeps where. The top bunk suits an older child who can climb safely, while the bottom bunk suits a younger child or a guest. Some bunks split into two single beds, which is useful when the children grow older and want separate rooms. Ask whether the model you are considering can be split.
Checks to make before you buy
Climb the ladder yourself, push the rail, and rock the frame from side to side. Sit on the top bunk and check the headroom. Look at every joint and bolt, and check that the slats under each mattress are fixed and evenly spaced. The frame should feel rigid and quiet under all of these tests.
Ask about the maximum mattress depth for the top bunk and the weight limit for each bunk, and keep those numbers. Check how the bunk is delivered and whether it needs assembling, because a bunk arrives in many parts and the assembly needs to be done carefully for the frame to stay square.