Home / Dining tables / Dining Tables: Shapes, Sizes and What to Check

Dining Tables: Shapes, Sizes and What to Check

A dining table is the piece of furniture that a household gathers around, and it is also one of the most used surfaces in the home. It holds meals, homework, work and conversation, so it needs to be the right size, the right height and made to last. This guide covers the shapes, the sizes that matter, the materials, and what to check before you buy.

Summary Verdict

A good dining table fits the room and the people who eat at it, with enough space per person and enough room behind the chairs. Measure the room first, then choose the shape that suits it.

Best for

Households that eat together and use the table daily.

Rooms where the table is the centre of the space.

Watch out for

Tables that are too big for the room, leaving no space behind the chairs.

Tops that mark easily or cannot be wiped clean.

What a dining table is made of

A dining table has three parts: a top, legs or a base, and the fixings that join them. The top carries everything that is put on it, so it needs to be flat, strong and able to resist heat, spills and scratches. The legs or base carry the weight of the top and everything on it, and they must be fixed firmly enough that the table does not wobble when someone leans on it.

The joints matter more than the finish. A table with a top that is screwed or bolted to a solid apron, which is the frame under the top, will be stiffer than a table where the legs are simply screwed into the top. Check the table by pressing down on one corner and by trying to rock it from side to side. A well made table stays still, and a poorly made one moves.

Rectangular tables

Rectangular tables are the most common shape, and they suit most rooms. They fit against a wall when space is tight, they seat people along both sides, and they come in a wide range of sizes, from a small two seater to a large table for ten or twelve. A rectangular table also suits a rectangular room, because the shape of the table follows the shape of the space.

The drawback is the corners. A rectangular table has four corners that can catch a hip or a knee, and the people at the ends sit further from the people in the middle, which makes conversation harder across a long table.

Round and oval tables

Round tables suit small rooms and small households. They have no corners, so they are easier to walk around, and everyone at the table is the same distance from the centre, which makes conversation easier. Round dining tables work well in a square room or a bay window, where a rectangular table would look awkward, and they can be pushed into a corner when not in use.

The limitation is size. A round table that seats six needs a diameter of about 150 cm, which takes up a lot of floor space for the number of seats, and a round table larger than that leaves the centre hard to reach. Oval tables split the difference: they seat people along the sides like a rectangle, but the rounded ends make them easier to walk around and to sit at.

Extendable tables

An extendable table changes size to suit the occasion. It is small for everyday use and larger when guests come, which makes it a practical choice for a household that eats as a family most days and hosts a larger group sometimes. Extendable dining tables work by adding a leaf to the centre, by folding out a section, or by sliding the top apart and dropping a leaf in.

The mechanism is the part to check. It should open and close smoothly, the leaf should sit level with the rest of the top, and the extended table should be as stable as the closed one. A mechanism that sticks or a leaf that sits proud of the top will annoy you every time you extend the table, and a table that wobbles when extended is a table that was not built for the extra length.

Sizes and seating

Allow about 60 cm of table width per person as a guide, not a standard, so a table for four needs about 120 cm of length along each side, and a table for six needs about 180 cm. The depth of the table should allow a plate, a glass and a little elbow room, which means about 75 to 90 cm for a rectangular table and a diameter of about 90 cm for a round table for four. These are guides, and the right size depends on how you eat: a table used for a full roast needs more space than one used for a bowl of soup.

The room needs space too. Allow at least 75 cm behind each chair so a person can pull the chair out and stand up, and more if the chair is against a wall or a walkway. A table that fits the room on paper but leaves no space behind the chairs is a table that is too big for the room. Measure the room, subtract the space the chairs need, and what is left is the size the table can be.

Heights and chairs

A dining table is about 75 cm high, and that height is set to match a dining chair with a seat about 45 cm high. The gap between the seat and the underside of the table should be about 25 to 30 cm, so there is room for thighs and for a person to sit comfortably. A table that is too high or too low for its chairs will be uncomfortable, however well it is made.

Check the height of the table against the height of the chairs you will use with it. Dining chairs come in many shapes, but the seat height is usually about 45 cm, and a table at 75 cm will suit them. If the chairs are taller or shorter than that, the table height needs to match. Sit at the table in the shop if you can, and check that your knees clear the apron under the top.

Wood, glass and other tops

Wooden tops are the most common, and they range from solid wood to veneer on a board. Solid wood is heavy, durable and can be sanded and refinished, while veneer gives the look of wood at a lower weight and cost. Wooden dining tables suit a household that wants a warm, natural surface, but wood marks with heat and water, so it needs coasters and mats, and it needs a finish that can be wiped clean.

Glass tops are easy to wipe and show the base of the table, which suits a modern room, but they show every fingerprint and crumb, and they can chip at the edges. Glass dining tables are worth considering if the room is small, because the clear top makes the table look lighter. Stone and laminate tops are also available: stone is heavy and hard wearing, and laminate is light, easy to clean and hard to mark, although it cannot be refinished if it is damaged.

What to check before you buy

Start with the measurements: the room, the space behind the chairs, and the size of the table when it is extended, if it extends. Then check the stability: press down on the corners, rock the table from side to side, and sit at it if you can. Check the joints under the top, and look at the finish for scratches, dents and uneven colour, especially on a wooden top.

Finally, think about how the table will be used. A table that holds homework and crafts needs a surface that can be wiped and that will not mark easily, while a table used only for meals can have a more delicate finish. A table is a long term purchase, and the details that matter are the ones you will live with every day: the height, the size, the stability and the surface.

A dining table is measured by the room it sits in, not by the number of people it seats. Allow space behind the chairs first, and the table size follows from that.
FeatureRectangularRoundExtendable
Best room shapeRectangular roomsSquare rooms, small spacesRooms that host guests sometimes
ConversationHarder across a long tableEasy, everyone faces the centreAs the shape allows
Floor spaceMore for the same seatsLess, no cornersSmall daily, larger when extended
Against a wallYes, sits flat to the wallAwkward, leaves a gapYes, when closed