Home / Dining chairs / Dining Chairs: Types, Sizes and What to Check

Dining Chairs: Types, Sizes and What to Check

A dining chair is sat on for the whole of every meal, so it needs to be comfortable, the right height for the table, and strong enough to last. It also needs to fit the room, because a chair that cannot be pushed in will stick out into the walkway. This guide covers the types, the sizes, the materials, and what to check before you buy.

Summary Verdict

A good dining chair fits the table, fits the person, and fits the room. Sit on it before you buy, check the height against the table, and make sure it can be pushed in when the meal is over.

Best for

Households that eat together and sit for a full meal.

Rooms where the chairs are used daily and need to last.

Watch out for

Chairs that are too high or too low for the table.

Chairs that look good but are uncomfortable after twenty minutes.

What a dining chair is made of

A dining chair has four parts: a seat, a back, legs and the joints that hold them together. The seat carries the weight of the person, the back supports the spine, the legs carry the load to the floor, and the joints hold the whole chair together. A chair that is well made feels solid when you sit on it and does not wobble when you move, because the joints are tight and the legs are fixed firmly.

The joints are the part that fails first. A chair is pulled out, pushed in, leaned on and moved many times a day, and every movement works on the joints. A chair with mortise and tenon joints, dowels or strong brackets will last, while a chair with weak joints will loosen and wobble. Check a chair by sitting on it and rocking gently from side to side: a good chair stays still, and a loose chair moves.

Wooden chairs

Wooden dining chairs are the most common type, and they range from a simple solid wood chair to a chair with a wooden frame and a woven or upholstered seat. Wooden dining chairs are durable and easy to wipe clean, which suits a household with children, and they can be sanded and refinished if they mark.

The shape of a wooden seat matters. A seat that is slightly scooped, with a dip in the middle, is more comfortable than a flat seat, because it supports the thighs and stops the sitter sliding forward. A wooden back should support the lower back without forcing the sitter upright, and the top rail should be at a height that suits the shoulders. Sit on the chair and check the seat and the back before you buy.

Upholstered chairs

Upholstered dining chairs have a padded seat, and sometimes a padded back, covered in fabric or leather. Upholstered dining chairs are more comfortable than wooden chairs for a long meal, because the padding spreads the weight and the fabric is warmer than wood. They also look softer and more formal, which suits a dining room used for guests.

The drawback is care. Fabric absorbs spills, and a dining chair will be spilled on, so the fabric needs to be cleanable or protected. Check the fabric before you buy: it should be tightly woven, firmly fixed to the frame, and easy to spot clean.

Metal and plastic chairs

Metal dining chairs are light, strong and easy to clean, and they suit a modern room or a household where the chairs are moved often. A metal frame with a wooden or plastic seat is a common combination, and it gives the strength of metal with the comfort of a shaped seat.

Plastic chairs are light, easy to clean and usually the least costly type, and they suit a kitchen or a household with young children. The choice between wood, upholstery, metal and plastic is about use: the chair should suit the room, the household and the length of the meals.

Seat height and size

A dining chair seat is about 45 cm high, and that height is set to match a dining table about 75 cm high. The gap between the seat and the underside of the table should be about 25 to 30 cm, so there is room for the thighs and for a person to sit comfortably. Dining chair height explains the measurements in more detail, and the same checks apply to every chair type.

The seat should also be wide and deep enough for the person who will sit on it. A seat about 45 cm wide and 40 cm deep suits most adults, while a narrower seat will feel cramped and a shallower seat will not support the thighs. The back should be high enough to support the lower back, and the chair should be light enough to pull out and push in without effort. Sit on the chair and check all of these before you buy.

Chairs with arms and without

A dining chair with arms, sometimes called a carver, gives more support and is more comfortable for a long meal, because the arms support the elbows and help a person stand up. The drawback is space: a chair with arms is wider than one without, and the arms may not fit under the table, so the chair cannot be pushed in fully. A chair with arms also takes up more room around the table, so fewer chairs will fit.

A chair without arms is narrower, easier to push in, and easier to fit around a table, which is why most dining chairs have no arms.

How many chairs

The number of chairs follows the size of the table and the number of people who eat at it. Allow about 60 cm of table width per person, and allow space between the chairs so that elbows do not clash. How many dining chairs you need covers the counting in detail, and the rule is simple: the table should seat the household comfortably, with a chair or two spare for guests if the room allows.

Think about storage as well. Chairs that are not in use need somewhere to go, and a chair that cannot be stacked or pushed under the table will take up floor space. A chair that stacks is also easier to move and to clean around.

Benches as an alternative

A dining bench can replace chairs along one side of the table. Dining benches save space, because a bench seats two people in the space of two chairs but can be pushed under the table when it is not in use, and they suit a household with children, who can slide along a bench more easily than they can move a chair.

The choice between a bench and chairs is about the household. A bench suits a casual dining room where the table is used for quick meals and homework, while chairs suit a dining room where meals are longer and comfort matters more. A bench and chairs can also be mixed, with a bench on one side and chairs on the other, which gives the space saving of a bench and the comfort of chairs.

What to check before you buy

Sit on the chair before you buy it. Check the seat height against the table, the depth of the seat, and the support of the back. Rock the chair gently to test the joints, and check that the legs are level, because a chair with one short leg will rock on a hard floor. Check that the chair can be pushed in under the table, and that it does not mark the floor.

Check the finish and the fabric. The finish should be even, with no scratches or rough patches, and the fabric should be tightly woven and firmly fixed. Ask whether spare chairs can be bought separately, because a set that cannot be extended is a set that cannot grow with the household. A chair that is comfortable, the right height and well made is a chair that will serve the household for years.

A dining chair is judged by sitting on it, not by looking at it. Sit down, check the height against the table, and trust what your back tells you.
FeatureWoodenUpholsteredMetal or plastic
Comfort for long mealsGood if the seat is shapedBest, padding spreads the weightFair, depends on the seat shape
CleaningEasy, wipes cleanHarder, fabric absorbs spillsEasy, wipes clean
DurabilityStrong, can be refinishedFabric wears, frame lastsStrong, no joints to loosen on moulded types
WeightMedium to heavyMedium to heavyLight, easy to move