A wooden dining chair is the most common type in British homes, and it ranges from a solid oak chair that will last for decades to a light pine chair that is easy to move. The wood decides how the chair wears, and the joints decide how long it lasts. This guide covers the wood types, the seat and back shapes, and what to check before you buy.
Wooden chairs suit households that want durable, wipe clean chairs that can be repaired over time. They suit them less well for very long meals, where a padded seat is more comfortable than a wooden one.
Best for
Households with children, where chairs need wiping clean.
Rooms where the chairs are used daily and need to last.
Watch out for
Flat wooden seats that are hard to sit on for long.
Joints that loosen with daily pulling and pushing.
What wooden chairs are made from
Wooden dining chairs are made from hardwood or softwood, and the wood decides how the chair wears. Oak, ash and beech are hardwoods, dense and hard wearing, and they resist dents and scratches well. Pine is a softwood, lighter and softer, and it marks more easily, although it is less costly and easier to move. A chair made from a hardwood will last longer than one made from pine, but it will also be heavier.
The wood also decides the colour and the grain. Oak has a visible grain and a warm colour, ash is paler with a finer grain, and beech is pale and even, with little visible grain. Pine has knots and a pale colour, and it is often painted, because the knots show through a clear finish. The wood does not change how the chair is used, but it changes how the chair looks and how it wears.
Solid wood and bentwood
A solid wood chair is made from boards and turned or shaped pieces of wood, joined together with mortise and tenon joints or dowels. It is heavy and strong, and it can be sanded and refinished if it marks. A bentwood chair is made by steaming wood until it is pliable, then bending it into curves, which gives the chair its rounded back and legs. Bentwood chairs are light and elegant, and they have fewer joints, because the bent pieces do the work of several straight ones.
A ladder back chair has a back made from horizontal slats, like the rungs of a ladder, and it is a traditional shape that suits a farmhouse or country dining room. A spindle back chair has a back made from vertical spindles, which is lighter and more open. The shape of the back is partly about looks and partly about support: a solid back supports the whole back, while a slatted or spindle back supports the lower back and lets air through.
Seats: shaped, flat and woven
The seat is the part of the chair that matters most for comfort. A shaped wooden seat, slightly scooped in the middle, is more comfortable than a flat seat, because it supports the thighs and stops the sitter sliding forward. A flat seat is simpler to make, but it is harder to sit on for long, and it suits a short meal better than a long one.
Some wooden chairs have a woven seat, made from rush, cane or paper cord, which is more comfortable than a wooden seat because it gives slightly under the weight. A woven seat needs care, because it can sag if it is overloaded or if it gets wet, and it will need replacing eventually. A wooden chair with a padded seat pad gives the comfort of upholstery with the durability of wood, and the pad can be removed for cleaning.
Backs and comfort
The back of a wooden chair should support the lower back without forcing the sitter upright. A back that is too upright will be uncomfortable, and a back that leans too far will not support the spine. The top rail of the back should be at a height that suits the shoulders, and the back should be wide enough to support the back without pressing on the arms.
Check the back by sitting on the chair and leaning back gently. The back should feel firm but not hard, and it should not flex or creak. A chair with a solid back will feel more supportive than one with a slatted back, but it will also be heavier and less open. The choice is about the household: a solid back suits a formal dining room, while a slatted back suits a casual room where the chairs are moved often.
Joints and stability
The joints are the part of a wooden chair that fails first. A dining chair is pulled out, pushed in, leaned on and moved many times a day, and every movement works on the joints. The strongest joints are mortise and tenon, where a shaped end of one piece fits into a hole in another, and they are often glued and pinned. Dowels and screws are also used, and they are adequate if the chair is not overloaded.
Check the joints by sitting on the chair and rocking gently from side to side. A good chair stays still, and a loose chair moves, with a creak or a wobble that shows the joints are working free. Look at the joints under the seat and where the legs meet the seat, and check for gaps or glue showing. A joint that is open will only get worse, and a chair with loose joints is a chair that needs repair.
Finishes and care
A wooden chair is finished with oil, lacquer or paint, and the finish decides how it is cared for. An oiled finish soaks into the wood and can be reapplied when it wears, while a lacquered finish seals the wood and is easy to wipe clean. A painted finish covers the wood completely, and it can be touched up if it chips, although it will show the chips more than a clear finish.
Wipe a wooden chair with a damp cloth to clean it, and dry it afterwards, because water left on the wood will raise the grain. Avoid harsh cleaners, which can strip the finish, and keep the chair away from radiators, which dry the wood and can cause the joints to loosen. A wooden chair that is wiped regularly and kept dry will last for decades, and the finish can be refreshed by sanding and reoiling or relacquering when it wears.
What to check before you buy
Sit on the chair before you buy it. Check the seat height against the table, the depth of the seat, and the support of the back. Rock the chair gently to test the joints, and check that the legs are level, because a chair with one short leg will rock on a hard floor. Check that the chair can be pushed in under the table, and that it does not mark the floor.
Check the wood and the finish. The finish should be even, with no scratches or rough patches, and the wood should be free of cracks and splits. Ask what wood the chair is made from, and whether it is solid wood or veneer, because a veneer chair cannot be sanded like a solid wood one. Dining chairs in general follow the same checks, and a wooden chair adds the joints to the list.
A wooden chair is judged by its joints. Sit on it, rock it gently, and listen: a chair that stays silent and still is a chair that will last.
| Feature | Oak or ash | Beech | Pine |
|---|---|---|---|
| Hardness | Hard, resists dents | Hard, resists dents | Soft, dents easily |
| Weight | Heavy | Medium | Light |
| Grain | Visible, warm | Pale, even | Knotty, often painted |
| Repair | Can be sanded and refinished | Can be sanded and refinished | Can be sanded and refinished |