Most mattresses give around seven to ten years of good service, but the calendar is only a rough guide. The real question is whether the mattress still supports you properly. This guide explains the signs of wear, why mattresses fail, and how to tell whether yours needs replacing or just a little care.
Judge a mattress by how it feels and how it looks, not by its age alone. A well-made mattress can last longer than ten years, and a poor one can fail sooner.
Best for
Anyone wondering whether their mattress has reached the end of its life.
Sleepers who wake with aches and want to know if the mattress is the cause.
Watch out for
A topper can mask a failed core, but it cannot repair it.
Age alone is not a reason to replace a mattress that still supports you.
Why seven to ten years is the usual guide
The seven to ten year figure comes from how mattress materials wear. Foam compresses slowly under nightly weight, springs lose some of their spring, and natural fillings such as wool and cotton settle and flatten. After several years of nightly use, the mattress no longer springs back as it did when new. The figure is a rough average, not a rule: a well-made mattress used by one light sleeper can last longer, and a cheap mattress used by two heavy sleepers can fail sooner.
Your body changes too. Weight, sleeping position and health can all change over a decade, and a mattress that suited you at thirty may not suit you at forty. The lifespan question is therefore partly about the mattress and partly about you. If either has changed enough, the mattress may no longer be right even if it is not worn out.
Visible signs of wear
The clearest sign is a dip. Strip the bed and look at the surface from the side: a hollow where the body rests, or a ridge in the middle of a double, means the fillings have compressed unevenly. A dip of more than a few centimetres is a sign that the support has gone in that area, and rotating the mattress will not fix it.
Other visible signs include a cover that is torn or stained through, fillings that have shifted so the surface feels lumpy, and springs that you can feel through the top layer. Run your hand across the surface: it should feel even, with no hard spots or soft hollows. If it does not, the mattress is telling you it is worn.
How it feels in the morning
The most useful test is how you feel when you wake up. If you wake with aches in your back, hips or shoulders that fade within an hour of getting up, the mattress may be the cause. A mattress that no longer supports you lets the spine sag during the night, and the muscles work to hold it in place, which leaves them stiff in the morning.
Try sleeping in another bed for a few nights, such as a guest bed or a hotel bed, and see whether the aches change. If they ease away from home and return when you come back, the mattress is a likely cause. This is not a diagnosis, only a practical test, and it is worth doing before spending money on a replacement. Our guide to mattresses and back pain explains the link between support and sleep in general terms.
Why mattresses fail
Mattresses fail in different ways depending on their construction. Foam mattresses fail when the foam compresses and no longer springs back, leaving a dip where the body rests. Pocket sprung mattresses fail when individual springs lose their tension, or when the comfort layers above the springs flatten and the springs become noticeable through the top.
Moisture speeds up the process. A mattress that is regularly damp, from sweat or from a humid room, will have fillings that break down sooner. A mattress on a poor base fails sooner too, because it dips between slats or sags over a broken support. Using a protector and keeping the base sound are the two simplest ways to slow the wear down.
A mattress does not fail on a date. It fails gradually, a little each night, until one morning you notice that it no longer supports you.
Turning and rotating
Before deciding that a mattress is worn out, check whether it has been turned and rotated. A mattress that has sat in the same position for years will wear unevenly, with a dip on one side and a firm patch on the other. Rotating it head to foot spreads the wear, and turning it over, if it is double-sided, spreads it further still.
Turn or rotate the mattress and sleep on it for a week. If the dip moves to the other end, the mattress is wearing unevenly but is still serviceable. If the dip stays in the same place, or if the mattress feels the same after turning, the wear is in the core and turning will not fix it. This simple test can save you from replacing a mattress that only needed turning.
Children and growing bodies
A child's mattress may need replacing sooner than an adult's, not because it wears out, but because the child outgrows it. A mattress that suited a small child may be too short or too soft for a teenager, and a mattress that has been used by a child for years may have compressed unevenly under a growing body.
Check a child's mattress as the child grows: measure the length, check for dips, and ask the child how it feels. A mattress that is too small is uncomfortable in a way that no amount of firmness can fix, and a mattress that has lost its support will not help a growing spine. Replace it when the child has outgrown it, rather than waiting for the calendar.
| Sign | What it means | What to do |
|---|---|---|
| Visible dip | Fillings or springs have compressed | Turn or rotate, then replace if it stays |
| Lumpy surface | Fillings have shifted | Rotate, then replace if it stays |
| Springs you can feel | Comfort layers have flattened | Replace, a topper will only delay it |
| Morning aches | Support may have gone | Test another bed, then decide |
When a topper helps, and when it does not
A topper can extend the life of a mattress that is still sound but feels uncomfortable. It adds a fresh comfort layer on top, which can soften a firm mattress or add a little support to a soft one. If the mattress has a shallow dip, a topper can level the surface for a while. Our guide to mattress toppers explains the types and thicknesses.
A topper cannot repair a failed core. If the springs have lost their tension, or the foam has compressed into a deep dip, a topper will simply follow the shape of the dip underneath. If you put a topper on a worn mattress and it still feels wrong after a week, the mattress itself is the problem, and the topper is only delaying the replacement.
Making the decision
Put the signs together. A mattress with a visible dip, a lumpy surface, or morning aches that fade once you are up, is telling you it has reached the end of its useful life. A mattress that is seven to ten years old and still feels even and supportive does not need replacing on age alone. A mattress that is only a few years old but already has a deep dip was probably poor quality to begin with.
When you do replace it, think about what went wrong with the old one. If it dipped in the middle, look for a stronger support core. If it felt too hot, look for better airflow. If it was too firm or too soft, adjust the firmness. The old mattress is useful evidence, and the next one should be chosen with its failings in mind.