A king size bed is the step up from a double, giving two sleepers more width and more length. At 150 x 200 cm it needs a bigger room, a bigger mattress and bigger bedding, and it is harder to move through a house. This guide explains the size, the frame choices and the checks to make first.
A king size bed suits couples who want more sleeping space and have a bedroom large enough to hold it comfortably. In a small room it dominates the space, so the room measurement comes first.
Best for
Couples who want extra width and length over a double.
Larger bedrooms where the bed can sit with clear space around it.
Watch out for
Bedrooms under about 3 metres wide, where the bed fills the room.
Narrow stairs and doorways, which a king frame may not pass.
The standard king size
A standard UK king size bed takes a mattress of 150 x 200 cm. It is 15 cm wider and 10 cm longer than a double, which gives each sleeper 75 cm of width instead of about 67 cm. The frame adds a few centimetres on each side, so the finished bed is usually around 160 cm wide and 210 cm long including the headboard.
A super king is larger again at 180 x 200 cm, and it needs a still bigger room. Do not confuse the two when ordering bedding: king size sheets will not fit a super king mattress, and super king sheets will hang loose on a king. Check the label on the mattress and the packet on the bedding before buying either.
| Size | Mattress | Room width needed |
|---|---|---|
| Double | 135 x 190 cm | About 270 cm |
| King | 150 x 200 cm | About 300 cm |
| Super king | 180 x 200 cm | About 330 cm |
How much room a king needs
A king frame needs a bedroom that leaves at least 60 cm of clear space on the sides you walk past. With the frame at roughly 160 cm wide, that means a room at least 280 cm wide for space on one side and 300 cm or more for space on both sides. Length matters too: the bed is about 210 cm long, so the room needs to hold that plus space at the foot.
Measure the room and mark the outline on the floor with tape before ordering. That simple step shows whether the wardrobe doors will open, whether the radiator is blocked and whether there is room to make the bed. A king in a room that is too small is worse than a double in a room that fits.
Frames for a king size bed
King size frames come in wood, metal and upholstered forms, and the wider span makes the centre support essential. A king frame without a centre rail and a support leg will sag in the middle, and that sag will show in the mattress over time. Check that the centre rail is bolted to the headboard and the foot end, not just resting in slots.
Wooden frames are the most common choice for a king, because the weight of the frame helps it stay still. Metal frames are lighter and easier to move, but they need thicker tube and a solid centre bar to stay rigid at this width. Upholstered frames add a padded headboard, which suits readers and anyone who sits up in bed.
A king is only 15 cm wider than a double, but those 15 cm change the room. Measure the bedroom before you measure the bed.
Storage under a king
A king size bed holds more storage than any smaller size, and ottoman storage works particularly well at this width because the lift opens the whole area under the mattress. Drawer beds are also available, usually with four drawers, two on each side. Divan bases for kings often have drawers on both sides as well.
Ottoman storage under a king is heavy to lift, because the mattress is larger and heavier, so the gas struts need to be strong and matched to the mattress weight. Test the lift in the shop if you can, and check that the base stays up on its own while you reach inside. Ottoman beds explains the lift mechanism in detail.
Choosing a king size mattress
A king mattress has to support two people across 150 cm, and a single spring unit can let movement travel from one side to the other. Pocket springs, where each spring moves independently, reduce that transfer, and zoned support can help when the two sleepers are different weights. A medium firmness suits most couples, but the right firmness depends on body weight and sleeping position.
Try the mattress together in the shop, lying in your normal positions. Turn over and sit up, and check whether your partner feels the movement. The guide to mattresses explains spring types, fillings and firmness in plain terms, and it is worth reading before choosing.
Moving a king into the house
A king size bed is the hardest standard size to move through a house. Measure the front door, the hallway, the stairs, the landing and the bedroom door, and check the size of the largest part as delivered. Most king frames arrive flat-packed and are assembled in the room, but divan and ottoman bases may arrive as one or two large pieces.
If the stairs turn tightly, a large base may not make the turn even if it fits through the door. Ask the retailer for the dimensions of the largest delivered piece, and measure the tightest point on the route. Delivery teams can often help, but only if the route has been checked first.
King size or super king
The choice between a king and a super king comes down to room size. A super king is 30 cm wider than a king, which gives each sleeper 90 cm, the same as a single bed. That is generous, but it needs a room at least 330 cm wide to leave walking space on both sides, and the bedding costs more and is harder to find.
For most couples in a standard large bedroom, a king is the right balance of space and practicality. A super king suits a very large bedroom or a household where a child or a pet regularly shares the bed. Compare the two on the floor plan of your own room, not on the showroom floor.