A lift-top coffee table looks like an ordinary coffee table, but its top rises and slides towards you, turning it into a surface where you can work on a laptop or eat a meal. It suits a living room where the table doubles as a desk or a dining surface. This guide explains how the mechanism works and what to check before you buy.
A lift-top coffee table suits a living room where the table is used for working or eating as well as for drinks. The mechanism must be smooth and steady, and the table must be stable at the raised height.
Best for
Working on a laptop from the sofa, or eating a meal in the living room.
Small homes, where one table does the work of two.
Watch out for
Mechanisms that stick, drop or wobble at the raised height.
Tables that tip forward when the top is raised and loaded.
How a lift top works
A lift-top coffee table has a top in one or two sections, hinged to a mechanism inside the base. When the top is lifted, the mechanism raises it and slides it towards the person sitting on the sofa, so the surface ends up above the sitter's lap rather than in the middle of the room. The raised height is usually 60 to 70 cm, which is close to the height of a desk and comfortable for a laptop or a plate.
The mechanism is usually a pair of metal arms with springs or gas struts, which carry the weight of the top and anything on it. A good mechanism lifts smoothly with a light pull, holds the top steady at the raised height, and lowers again with a gentle push. A poor one sticks, drops suddenly, or lets the top wobble when it is raised. The mechanism is the heart of the table, and it deserves the most attention.
When a lift top suits a room
A lift-top table suits a living room where the coffee table is used for working or eating as well as for drinks. It is a good choice in a small home, where there is no room for a separate desk, and in a household where meals are often eaten on the sofa. It is less suited to a room where the table is used only for drinks and books, since the mechanism adds weight and cost for a feature that will rarely be used.
Think honestly about how often the top will be raised. A table that is lifted every evening earns its mechanism, while one that is lifted once a month is a standard coffee table with extra parts that can wear out. A coffee table with a lift top is at its best when the raised position is part of the daily routine, not an occasional novelty.
The mechanism: what to look for
Test the mechanism before you buy. Lift the top and see whether it rises smoothly, without sticking or jerking, and whether it stays in place at the raised height without sinking. Place a book or a laptop on the raised top and see whether it holds steady. Lower the top again and check that it closes smoothly and sits flat, with no gap at the front or the sides.
Look at the mechanism itself if you can. Metal arms with a solid hinge and a spring or a gas strut are the usual design, and they should feel firm rather than loose. Check that the fixings are tight and that the arms do not flex when the top is raised. A mechanism that feels flimsy in the shop will only get worse with daily use, and a lift top that drops suddenly is a hazard for fingers and for anything on the top.
Pros
- Raises to a comfortable height for working or eating
- One table does the work of a coffee table and a desk
- Many have hidden storage under the top
Cons
- Heavier and more expensive than a standard table
- The mechanism can wear and needs to stay smooth
- Can tip forward when the top is raised and loaded
A lift-top table is judged by its mechanism. If the top rises smoothly and stays steady when it is raised, the table works. If it sticks or drops, it will be left down and never used.
Stability at the raised height
When the top is raised and slid towards the sitter, the weight shifts forward, and the table can tip if the base is too light or too narrow. Test this before you buy: raise the top, place a book on it, and press down gently on the front edge. The table should stay firm, with no lifting of the back legs. A table that tips forward when the top is loaded is unsafe, and it will only get worse as the mechanism wears.
Check that the table sits flat on the floor without rocking, both with the top down and with it raised. A table with a wide, heavy base is more stable than one with narrow legs, and a lower shelf adds weight low down, which helps. If the table will be used with a laptop, check that the raised top is large enough for the laptop and a cup, since a top that is too small is awkward to work on.
Storage under the top
Many lift-top tables have a compartment under the top, revealed when the top is raised. It is useful for remote controls, notebooks, chargers and other small items that are used with the table, and it keeps the top clear when the table is lowered. Check the depth of the compartment: it should be deep enough to hold what you need, but not so deep that items are hard to reach.
Keep the compartment tidy, since a compartment that is overfilled can stop the top closing properly. Do not store anything tall in it, and check that the top sits flat when the compartment is full. A storage compartment is a bonus, not the main reason to buy a lift-top table, and it should not distract from the mechanism and the stability, which matter more.
Materials and construction
Lift-top tables are usually made from timber, veneered board or a combination of the two, with a metal mechanism inside. Solid timber tops are durable and can be repaired, while veneered board is lighter, which helps the mechanism lift the top more easily. The frame needs to be rigid, since it carries the mechanism as well as the top, and the joints should be solid.
Check the top for flatness and the edges for sharpness, as with any coffee table. Check that the finish is even, and that the top sits flush with the frame when it is lowered. A top that does not sit flat when closed will catch on cups and books, and it is a sign that the mechanism is misaligned or the frame is out of square.
What to check before you buy
Lift the top several times and check that it rises smoothly, holds steady at the raised height, and lowers flat. Test the stability with the top raised and loaded, and check that the table sits flat on the floor. Look at the mechanism and the joints, and open any storage compartment to check its depth.
Finally, sit on your sofa and test the raised height. A laptop or a plate should be comfortable to use without hunching, and the top should be close enough to reach easily. A lift-top table that lifts smoothly, stays steady and suits your sofa will be used every day. One with a sticking mechanism or a tipping base will be left down and forgotten.