A recliner sofa is a two or three seat sofa where one or more seats recline, tilting back and raising a footrest, so each person can lean back and put their feet up. It brings the comfort of a recliner chair to a sofa that the whole household uses. This guide explains how recliner sofas work, the layouts to expect, and the checks that matter before you buy.
A recliner sofa suits a living room where the sofa is the main seat and more than one person wants to recline. Each seat needs its own check, and the space behind and in front decides whether it fits.
Best for
Families and households where the sofa is used every evening.
Living rooms where a recliner chair alone would not be enough.
Watch out for
Middle seats that do not recline, which can be a surprise.
Space needed behind the sofa and in front of the footrests.
How a recliner sofa works
A recliner sofa has a mechanism built into each reclining seat, hidden inside the frame. Working the lever or the button on a seat tilts its backrest backwards and swings its footrest up from the front, so the person in that seat can stretch out. Each reclining seat works on its own, so one person can recline while the person beside them sits upright.
On most recliner sofas only the end seats recline, while the middle seat is fixed. This is because the mechanisms need space inside the frame, and fitting one into the middle seat as well as the ends is harder and more expensive. Some three seat sofas do recline in all three seats, and some corner sofas have reclining seats at the ends of each section. Check which seats recline before you buy, since it is not always obvious from the outside.
Layouts and sizes
Two seat recliner sofas suit a smaller living room, and both seats usually recline. Three seat recliner sofas suit a larger room, and the end seats usually recline while the middle seat is fixed. Corner recliner sofas suit a large room where the seating wraps around a corner, and the reclining seats are usually at the ends of the longer section. The layout should follow the room and the household, not the other way round.
Measure the sofa against the room, and remember that a recliner sofa is deeper than a standard sofa, even when it is upright, because the mechanism sits inside the frame. A three seat recliner sofa can be 100 cm deep or more, which is noticeably deeper than a standard sofa. Check the depth as well as the length, and leave room for the footrests to extend in front.
Manual and electric seats
Recliner sofas come with manual and electric mechanisms, and the choice is the same as for a recliner chair. A manual seat is worked by a lever or a handle on the side, and the sitter's own weight moves the backrest. An electric seat is worked by a button, and a motor moves the backrest and the footrest smoothly to a precise position. An electric recliner sofa needs a power socket nearby, and each electric seat has its own cable.
Electric seats give a smoother movement and a more precise position, and they suit anyone who finds a manual lever hard to work. Manual seats are simpler, lighter and need no power, and there is less to go wrong. Some sofas mix the two, with electric seats at the ends and a manual seat in the middle, so check the mechanism on each seat rather than assuming they are all the same.
| Feature | Two seat recliner | Three seat recliner | Corner recliner |
|---|---|---|---|
| Reclining seats | Usually both | Usually the end seats | Usually the ends |
| Room size | Small to medium | Medium to large | Large |
| Depth | Deep, around 100 cm | Deep, around 100 cm | Deep, with a chaise or corner |
| Space behind | Needs clearance to recline | Needs clearance to recline | Needs clearance on each side |
A recliner sofa is really several recliners sharing one frame. Check each seat on its own, because a sofa is only as good as its weakest mechanism.
Space behind and in front
A recliner sofa needs space behind it for the backrests to tilt back, and space in front for the footrests to extend. A standard mechanism may need 30 cm or more behind the sofa, while a wall-hugger mechanism needs as little as 10 cm, since the seat slides forward as the back tilts. Measure the clearance before you buy, and check whether the sofa will stand against a wall or in the middle of the room.
The footrests need room too. A footrest extends 50 cm or more in front of the sofa, and it needs a clear space to swing out. A coffee table placed too close will block the footrest, so measure the full footprint with the footrests out, and place the coffee table accordingly. A recliner sofa that cannot open fully is a frustration, and it is one that is easy to avoid by measuring first.
Frames, springs and comfort
The frame of a recliner sofa carries several mechanisms as well as the sitters, so it needs to be strong. A hardwood frame with solid joints is the best choice, and it will hold the mechanisms true for years. Sit in each seat and feel for even support: the seat should feel firm, the back should support the spine, and the footrest should support the calves without cutting off the circulation.
Check the cushions as well. On a recliner sofa the seat cushions are often fixed, since they need to move with the mechanism, and they should feel even across the whole seat. A cushion that sags or feels lumpy will be noticed every evening, and it is harder to fix on a recliner sofa than on a standard one, since the cushion is part of the mechanism.
Leather and fabric
Recliner sofas come in leather and fabric, and the choice affects care and comfort. Leather is easy to wipe clean and it suits a sofa that is used every day, but it needs conditioning to stop it drying out. Fabric is warmer to the touch and comes in more colours, but it needs vacuuming and it can stain. A leather recliner sofa is often the more durable choice in a busy household, provided it is conditioned regularly.
Check that the covering is fitted neatly over the mechanisms, with no loose fabric that could catch in the moving parts. On a recliner sofa there are more moving parts than on a standard sofa, so a loose cover is more of a risk. Look at the gaps between the seats, where the mechanisms move, and check that the covering sits smoothly there.
What to check before you buy
Sit in every seat, work every mechanism, and check that each one moves smoothly and locks firmly. Check which seats recline and which do not, and make sure the layout suits the household. Measure the space behind and in front of the sofa, with the footrests out, and check that the sofa will fit through the door on delivery.
Finally, check the frame, the covering and the cushions, and ask about the guarantee on the mechanisms, since they are the parts most likely to need attention. A recliner sofa that moves smoothly, fits the room and suits the household will be the most used seat in the house for years.