Sofa cushions are the part of a sofa you sit on, lean against and plump every day, and the filling decides how they feel and how long they hold their shape. Foam, feather and fibre all behave differently, and a cushion that has lost its shape cannot be fixed by plumping. This guide explains the fillings and the checks.
A good cushion holds its shape, recovers after use and suits how you sit. Foam is the practical choice for seats, feather is the soft choice for backs, and a mix gives the best of both.
Best for
Anyone whose sofa cushions have gone flat or lumpy.
Households choosing a new sofa and weighing filling options.
Watch out for
Cushions that stay dented after you stand up.
Feather cushions in homes where daily plumping will not happen.
Foam fillings
Foam is the most common filling for seat cushions, because it is firm, holds its shape and needs little care. The foam is cut to the size of the cushion and wrapped in a fabric cover, sometimes with a layer of fibre on top for softness. High-density foam lasts longer than low-density foam, and it is less likely to go soft or sag.
The drawback of foam is that it can feel hard, especially when new, and it softens slowly with use. A foam cushion that has gone soft in the middle has lost its density and should be replaced, because it will not recover. Check the firmness by pressing the cushion and watching how quickly it springs back.
| Filling | Feel | Care |
|---|---|---|
| Foam | Firm, holds shape | Little care needed |
| Feather | Soft, moulds to body | Plump daily |
| Fibre | Light and soft | Plump often, flattens fast |
Feather fillings
Feather fillings are soft, mouldable and comfortable, and they are the traditional choice for back cushions and for luxury seat cushions. The feathers are usually mixed with down, which is softer and lighter, and the mix is held in a cambric inner case that stops the feathers poking through. Feather cushions need plumping daily to keep their shape.
The drawback of feather is the care it needs. A feather cushion that is not plumped will go flat and lumpy, and it will lose its shape faster than foam. Feather is also more expensive than foam or fibre, and it can cause allergies in some people. It suits a formal living room more than a family room.
Fibre fillings
Fibre fillings are made from polyester strands, which are light, soft and cheap, and they are the most common filling for back cushions. Fibre is easy to care for, it can be washed, and it does not cause allergies, but it flattens faster than foam or feather, and it needs plumping to keep its shape.
Fibre is often used as a wrapping around a foam core, which gives the firmness of foam with the softness of fibre on top. That combination is a practical choice for seat cushions, because it holds its shape better than pure fibre and feels softer than pure foam. Check the filling by squeezing the cushion and feeling for the core inside.
A cushion is judged after you stand up, not while you sit down. If it stays dented, the filling has already failed.
Mixed fillings
Many sofas use a mix of fillings: a foam core with a feather or fibre wrap for seat cushions, and a feather and fibre mix for back cushions. The mix gives the support of foam with the softness of feather or fibre, and it needs less plumping than pure feather. It is the most common filling in mid-priced sofas, and it is a sound compromise.
The mix should be stated in the product details, but it is worth asking directly. A cushion described as feather may be mostly fibre with a little feather, and a cushion described as foam may have a fibre wrap. The mix decides how the cushion will feel and how much care it needs.
Cushion sizes and shapes
Seat cushions are usually rectangular, sized to the seat width, and they should fit the frame snugly, with no gap at the sides and no overhang at the front. Back cushions are usually square or slightly rectangular, and they should sit upright without slumping. A cushion that is too small for its frame will slide around, and a cushion that is too large will bunch up. Measure the cushion and the frame before ordering a replacement, because a cushion that is even a few centimetres out will not sit properly in the seat.
Check the size by removing the cushion and measuring it, then comparing it with the frame. The cushion should be the same size as the space it fills, with a little extra fullness to keep it plump. Sofa covers explains how covers fit over cushions and frames.
Plumping and care
Plumping a cushion means shaking it, punching it and smoothing it back into shape, and it should be done daily for feather and fibre cushions. Hold the cushion by opposite corners and shake it, then punch the centre and smooth the surface. Turn the cushion regularly, so the wear is spread across both sides, and rotate the cushions between seats.
Vacuum the cushions with an upholstery attachment to remove dust, and clean the covers according to the label. Do not sit on the arms of the sofa, because that crushes the cushions unevenly, and do not let one seat take all the use, because it will wear faster than the others.
Replacing worn cushions
Cushions wear out faster than the frame, and they can often be replaced without replacing the whole sofa. Measure the old cushion and order a replacement in the same size and filling, or in a firmer filling if the old one went soft. A new foam core can revive a sofa that is otherwise sound, and it is far cheaper than a new sofa.
Check whether the retailer or the maker sells replacement cushions for your model, because the size and the shape need to match. Sofas explained covers frames, suspension and fillings together, and it is worth checking the frame and the suspension before spending on new cushions.