Home / Armchairs / How to Choose an Armchair

How to Choose an Armchair

Choosing an armchair starts with the person who will sit in it, not with the room or the fabric. The seat height, the seat depth, the back height and the arm height all have to fit the sitter, and a chair that fits one person may not fit another. This guide works through the checks in order, so the chair you buy is the chair you will sit in.

Summary Verdict

Measure the sitter first, sit in the chair for several minutes, and choose a fabric that suits the household, and the chair will be used every day.

Best for

Anyone buying a chair for themselves or for one person in the household.

Readers and anyone who sits in one chair for hours at a time.

Watch out for

Buying by looks alone, without sitting in the chair or measuring the sitter.

A seat depth that does not fit the sitter, which makes the chair uncomfortable within minutes.

Start with the sitter

The sitter decides the size. Measure the height of the person who will use the chair most, and check the length of their thighs from the back of the knee to the back of the hip. The seat depth should be close to that length, so the thighs are supported without the seat edge pressing behind the knees. The seat height should let the feet rest flat on the floor, with the knees at a right angle.

If more than one person will use the chair, choose for the person who will use it most, and check that the others can sit in it comfortably too. A chair that fits a tall person will not fit a short person, and a chair that fits a short person will not fit a tall one. There is no single size that fits everyone, which is why sitting in the chair matters more than reading the dimensions.

Seat height, depth and width

Seat height is measured from the floor to the top of the seat cushion, and it is usually about 45 to 50 centimetres. A seat that is too high leaves the feet dangling, and a seat that is too low makes standing up hard. Sit in the chair and check that your feet rest flat on the floor and that you can stand up without pushing hard on the arms.

Seat depth is measured from the front of the seat to the back, and it is usually about 55 to 60 centimetres. A seat that is too deep will push you forward or leave your lower back unsupported, and a seat that is too shallow will leave your thighs unsupported. Seat width should leave a little room on each side, usually about 55 to 65 centimetres for a standard chair.

Back support and arms

The back should support your shoulders and your lower back without forcing you upright. A high back suits reading and resting, while a low back suits a chair that will be used for short sits or in a room where the chair is seen from behind. Sit back in the chair and check where the top of the back meets your shoulders: it should meet them, not sit below them or tower above them.

The arms should let your elbows rest without hunching your shoulders. Arms that are too high will push your shoulders up, and arms that are too low will leave your elbows unsupported. The arms also help you sit down and stand up, so they should be firm and at a height you can push against. A chair with no arms, or with very low arms, is harder to get out of.

Pros

  • A chair that fits the sitter will be used every day
  • Trying the chair in the shop tells you more than any measurement
  • A firm frame and a good fabric will last for years

Cons

  • A chair that fits one person may not fit another
  • A comfortable chair in the shop may feel different at home
  • A delicate fabric will not survive a busy household

Frame and fillings

The frame is usually timber, with joints held by dowels, brackets or bolts, and the seat is supported by springs or webbing. Press the arms and the back to test the frame, and listen for creaks when you sit down and stand up. A sound frame feels stiff, and a weak frame flexes. Ask what the frame is made from, because the answer tells you how the chair will age.

The filling decides how the seat feels. Foam gives a firm seat that holds its shape, fibre gives a soft seat that needs plumping, and a mix of the two is the most common choice. Sit in the chair for several minutes, and check whether the seat springs back when you stand up. A seat that stays dented will only get worse.

A chair that feels right for five minutes will usually feel right at home, and a chair that feels wrong in the shop will not improve.

Fabric and colour

Choose the fabric for the household, not just the colour. A plain weave hides marks and wears evenly, a velvet looks rich but shows where people sit, and a pattern hides stains but dates faster. Leather wipes clean and wears well, but it feels cold at first and needs conditioning. Take a sample home and look at it in the light of the room where the chair will stand.

Colour matters too. A pale chair in a busy room will show every mark, and a dark chair in a small room will make the room feel smaller. A colour that looks good in the shop may look different at home, because the light is different. Live with the sample for a few days before you commit, and check it against the sofa, the carpet and the curtains.

Trying before you buy

Sit in the chair for several minutes, in the position you will use at home. Read a page of a book, put your feet up if the chair allows, and stand up again. Check the seat, the back and the arms, and try the recliner or the swivel if the chair has one. A chair that feels right for five minutes will usually feel right at home, and a chair that feels wrong in the shop will not improve.

Measure the room and the door before you order, and check that the chair fits through the hallway. The guide to small armchairs explains measuring for a tight space, and the guide to armchairs explains the types. A chair that fits the sitter, the room and the household is a chair that will be sat in every day.