Home / Armchairs / Recliner Armchairs: How They Work and What to Check

Recliner Armchairs: How They Work and What to Check

A recliner armchair is a chair that changes shape: the back tilts, the footrest rises, and the sitter can lie back without getting up. The change is worked by a lever, a handle or an electric motor, and the mechanism underneath is what decides how smoothly it moves and how long it lasts. This guide explains how recliners work and what to check.

Summary Verdict

Try the recliner in the shop, check that it moves smoothly and locks where you want it, and measure the space behind it before it comes home.

Best for

Anyone who wants to sit back with their feet up in the evening.

Readers and television watchers who sit in one chair for hours.

Watch out for

A recliner pushed against a wall, with no room for the back to tilt.

A stiff or grinding mechanism, which will only get worse with use.

How a recliner works

A recliner is an armchair with a mechanism under the seat that links the backrest and the footrest. When you pull the lever or press the button, the footrest swings up and the back tilts back, moving the sitter from upright to a lying position. The mechanism is usually a steel frame with pivots and a spring or a motor, and it carries the weight of the sitter as it moves.

The seat and the back are padded as on any armchair, but the frame is built to carry the moving parts. The back is hinged at the base, the footrest is hinged at the front, and the two move together. A well made recliner moves smoothly through its range, stops where you leave it, and returns to upright without sticking or dropping. The guide to armchairs explains the frames and fillings that sit around the mechanism.

Manual recliners: lever and handle

A manual recliner is worked by the sitter. A lever on the side releases the footrest, which springs up, and the sitter leans back to tilt the backrest. A handle works the same way, with a pull rather than a push. Manual recliners need no power, they have fewer parts to fail, and they are usually cheaper than electric versions.

The trade off is control. A manual recliner usually has two or three set positions, upright, partly reclined and fully reclined, and it may not stop in between. The lever needs a firm pull, and the footrest can snap up quickly if it is not held. Try the lever several times in the shop, and check that it releases easily and that the footrest rises smoothly rather than with a jolt.

Electric recliners: motor and button

An electric recliner is worked by a motor, controlled by a button or a small handset on the side of the chair. Press the button and the motor moves the back and the footrest smoothly, stopping at any angle when you release it. Some electric recliners have separate controls for the back and the footrest, so you can raise your feet without lying back, or lie back without raising your feet.

An electric recliner needs a power socket nearby, and the cable should be routed so it cannot be tripped over or trapped under the chair. The motor adds weight and cost, and it is a part that can fail, so ask about the guarantee on the motor and the mechanism. A good electric recliner moves quietly and smoothly, with no grinding or jerking.

FeatureManual reclinerElectric recliner
ControlLever or handleButton or handset
PositionsTwo or three set stopsAny angle, stops where released
PowerNone neededSocket nearby
Moving partsSpring and pivotsMotor, spring and pivots
FeelFirm, quick movementSmooth, slow movement

Wall hugger and space needs

A standard recliner needs space behind it, because the back tilts backwards as it reclines. The space needed is usually about the depth of the seat, and it varies by design. A wall hugger recliner is designed to need less space: the seat slides forward as the back tilts, so the chair can sit closer to the wall. Wall huggers suit small rooms, but they still need some gap behind them.

Measure the space before you buy. Put the chair where it will stand, measure from the back of the chair to the wall, and check the listing for the reclined depth. A recliner that cannot recline because the wall is in the way is a chair that will frustrate you every evening. Leave room in front too, because the footrest extends forward when it rises. A chair that is measured for the space will recline fully on the first evening, and every evening after.

A recliner that cannot recline because the wall is in the way is a chair that will frustrate you every evening.

Frames, fillings and comfort

A recliner frame carries more load than a standard armchair frame, because it carries the mechanism and the moving weight of the sitter. The frame is usually timber with a steel mechanism, and the joints should be tight and the mechanism should be bolted firmly to the frame. Press the arms and the back, and listen for creaks when the mechanism moves. The guide to leather armchairs explains how leather works on a recliner frame.

The seat and the back are padded as on any armchair, and the filling decides the comfort. A recliner seat is usually firmer than a standard armchair seat, because it has to support the sitter in several positions. Sit in the chair upright, partly reclined and fully reclined, and check that each position feels supported. A chair that is comfortable upright but not reclined will not be used reclined.

What to check before buying

Try the mechanism at least five times in the shop. It should move smoothly, stop where you leave it, and return to upright without sticking. Listen for grinding, clicking or squeaking, and feel for any looseness in the arms or the back. Check that the footrest supports your legs without pressing behind the knees, and that the back supports your shoulders when reclined.

Measure the space behind and in front of the chair, check that the power cable reaches a socket if the chair is electric, and ask about the guarantee on the mechanism and the motor. A recliner is a chair with moving parts, and the moving parts are what you are buying as much as the seat.