A leather armchair wears well, wipes clean and looks better as it ages, but not all leather is the same. The type of leather decides how it feels, how it wears and how much care it needs. This guide explains the main types, how to tell them apart, and what to check before you buy.
Choose the leather type for how the chair will be used, check which surfaces are real leather, and keep the chair out of direct sun and away from radiators.
Best for
Households who want a chair that wipes clean and wears well.
Anyone who likes leather that softens and gains character with use.
Watch out for
Bonded leather sold as if it were full leather, which wears very differently.
Leather left in direct sun or beside a radiator, which dries and cracks it.
Full grain leather
Full grain leather is the top layer of the hide, with the natural grain left intact. It is the strongest and most durable type, and it develops a soft sheen with use, known as a patina. The surface shows the natural marks of the hide, small scars and variations in the grain, and those marks are part of its character rather than faults.
Full grain leather feels soft and slightly cool at first, and it warms up as you sit. It is the most expensive type, and it is used on the best chairs. It needs conditioning to stay supple, but it does not need much else. A full grain chair that is cared for will last for decades, and it will look better at ten years old than it did when it was new.
Top grain and corrected grain
Top grain leather is the top layer of the hide with the surface lightly sanded and finished, which gives a more even look than full grain. It is still strong and durable, and it is the most common type on good quality armchairs. It feels smooth and soft, and it takes a dye evenly, so it is available in a wide range of colours.
Corrected grain leather is top grain that has been sanded more heavily and given a printed grain pattern, to hide marks on the hide. It looks even and tidy, but it is less breathable than top grain and it does not develop the same patina. It is a practical choice for a chair that will be used every day, because it resists stains and wear well.
Bonded leather and matching materials
Bonded leather is made from leather offcuts ground up and bonded together with a binding agent, then coated with a surface layer. It looks like leather at first, but it is not a single piece of hide, and it wears very differently. It can peel and crack after a few years, especially on the seat and the arms where it is used most. It should always be sold as bonded leather, and the price should reflect that.
Many chairs use leather on the parts you touch, the seat, the back and the arms, and a matching material on the sides and the back, where you do not sit. The matching material is usually a vinyl or a bonded leather made to look like the real leather. Ask which surfaces are leather and which are matching material, and get the answer in writing if it matters to you.
| Type | What it is | Feel | Wear |
|---|---|---|---|
| Full grain | Top layer, grain intact | Soft, natural marks | Best, gains patina |
| Top grain | Top layer, lightly sanded | Smooth, even | Very good |
| Corrected grain | Sanded, printed grain | Even, tidy | Good, resists stains |
| Bonded leather | Ground offcuts, bonded | Looks like leather | Peels and cracks |
Frames and comfort
A leather armchair is built like any armchair: a timber frame, springs or webbing under the seat, and padding in the seat and the back. The leather is stretched over the padding and fixed underneath, and the quality of the frame matters as much as the leather. Press the arms and the back to test the frame, and sit in the chair for several minutes to check the seat depth and the back height. The guide to armchairs explains the frames and fillings in full.
Leather seats can feel firm at first, because the leather is stretched tight. It softens with use, and the seat will give a little as the leather stretches. Sit in the chair upright and leaning back, and check that the back supports your shoulders. A leather chair that is comfortable in the shop will usually stay comfortable, because the leather only gets softer.
A full grain chair that is cared for will last for decades, and it will look better at ten years old than it did when it was new.
Care and cleaning
Leather is easy to clean. Dust it with a soft cloth, wipe spills with a damp cloth and dry it straight away. Do not use household cleaners, solvents or baby wipes on leather, because they can strip the finish and dry the surface. A cleaner made for leather, used occasionally, will lift dirt without harming the finish. The guide to cleaning an armchair explains the care label codes and spot cleaning.
Condition the leather once or twice a year with a conditioner made for leather, applied thinly with a soft cloth. The conditioner feeds the leather and keeps it supple, which stops it drying and cracking. Keep the chair out of direct sun and away from radiators, because heat and sun dry leather faster than anything else. A leather chair kept out of the sun will keep its colour for years.
What to check before buying
Ask what type of leather the chair is made from, and which surfaces are leather. Sit in the chair and check the seat, the back and the arms. Look at the stitching, which should be even and tight, and look at the colour, which should be even across the panels. Check the frame by pressing the arms and the back, and ask about the guarantee.
Be careful with a chair that is described only as leather, with no type given. A retailer that knows its product will say whether the leather is full grain, top grain, corrected or bonded, and will say which surfaces are leather. If the answers are vague, treat the chair with the same caution, and compare it with a chair whose leather is clearly described.