Paint can give tired garden furniture a fresh start, and it protects the surface underneath from rain and sun. The paint itself is the easy part. Most of the work is preparation: cleaning, sanding and priming, so the paint sticks and stays stuck. This guide works through the job in order, from the first wash to the last coat.
Paint lasts when the preparation is thorough, so spend most of the time cleaning, sanding and priming, and the paint will look after itself.
Best for
Wooden and metal sets that are sound but look tired or weathered.
Anyone who wants a colour change without buying a new set.
Watch out for
Painting over dirt, loose paint or damp wood, which peels within weeks.
Indoor paint outside, which cracks and flakes in the first winter.
Which furniture takes paint
Wood and metal take paint well, provided the surface is sound. A wooden chair with solid joints and no rot will paint up nicely, and a metal table with a sound frame will too. Woven rattan is a poor candidate, because paint sits on the strands, cracks when the weave flexes and looks patchy. Plastic is also difficult, because paint does not grip smooth plastic without a special primer, and it peels off in sheets.
Check the furniture before you commit. Press the joints, look for rot at the feet and the end grain, and check metal for rust that has eaten through. Paint will not fix a weak joint or a rotten leg, and painting over damage just hides it until it fails. If the frame is sound, paint is a good way to extend its life by several seasons.
Preparation: cleaning and sanding
Start by cleaning the furniture as you would for any wash: brush off the dirt, wash with warm soapy water, rinse and let it dry fully. Then sand the whole surface with a medium sandpaper, working along the grain on wood. The aim is not to strip the wood bare, but to give the paint something to grip and to remove loose flakes of old paint or varnish. The guide to cleaning garden furniture explains the washing step for every material.
On metal, sand the rust spots back to bright metal with a wire brush or sandpaper, and sand the rest lightly to key the surface. Wipe the dust off with a damp cloth and let it dry. Fill any small cracks or holes in wood with an exterior filler, let it set, and sand it smooth. Preparation is dull work, and it decides whether the paint lasts one season or five.
Primer: the coat that matters most
Primer is a base coat that helps paint stick and stops the surface underneath showing through. Wood needs a primer made for exterior wood, metal needs a primer made for metal, and previously painted surfaces need a primer if you are changing colour sharply, for example from dark green to white. One coat of primer, applied thinly and evenly, is usually enough.
Apply primer with a brush for small pieces and a roller for flat surfaces like table tops. Let it dry for the time stated on the tin, and do not rush it. A primer that is still tacky will drag when the top coat goes on, and the finish will be rough. If the primer raises the grain on wood, a light sanding with fine sandpaper will smooth it before the top coat.
| Surface | Preparation | Primer | Top coat |
|---|---|---|---|
| Bare wood | Clean, sand, fill | Exterior wood primer | Exterior wood paint |
| Painted wood | Clean, sand loose paint | Primer if changing colour | Exterior wood paint |
| Bare metal | Clean, sand rust off | Metal primer | Exterior metal paint |
| Painted metal | Clean, sand lightly | Primer on bare spots | Exterior metal paint |
Choosing the paint
Use a paint made for outdoor use, and match it to the material. Exterior wood paint is flexible, so it moves with the wood as it swells and shrinks, and it resists rain and sun. Exterior metal paint is harder and resists chipping, and it often includes a rust inhibitor. A paint sold for garden furniture will usually be one of these two, and the tin will say which surfaces it suits. The guide to restoring teak garden furniture explains the oil finish that suits teak instead of paint.
Finish matters too. A satin or eggshell finish is the usual choice for garden furniture, because it looks neat and wipes clean, while a gloss finish is harder and shinier but shows every brush mark. Matt finishes look soft but mark easily and are harder to clean. Pick a colour you will like in all weathers, because a bright colour in the shop can look harsh in a small garden.
Preparation is dull work, and it decides whether the paint lasts one season or five.
Applying the paint
Paint on a dry, mild day, out of direct sun and wind, because sun dries paint too fast and wind blows dust onto wet paint. Stir the paint well, and apply it thinly with a brush, working along the grain on wood and in even strokes on metal. A thin coat dries faster and sticks better than a thick coat, and it is easier to fix if it runs.
Let the first coat dry fully, then sand it very lightly with fine sandpaper and wipe off the dust. Apply a second coat the same way. Two thin coats last much longer than one thick coat, and they look better too. Do not paint the underside of a seat or the inside of a joint, because paint there can glue moving parts together.
Drying, second coats and upkeep
Leave the furniture to dry for at least a day before you sit on it or put it outside, longer if the weather is damp. Paint feels dry to the touch long before it is hard, and a chair sat on too soon will show marks where clothing pressed against it. Once the paint is hard, the furniture can go back into use, and a cover will protect the new finish over winter.
Painted furniture needs a check each spring. Look for chips, especially on edges and feet, and touch them up before water gets underneath. A small brush and the leftover paint from the tin will do the job in minutes. If the paint starts to peel in large sheets, the preparation was not thorough enough, and the piece will need sanding back and painting again. Done well, a painted set should last several seasons before it needs another coat.