IKEA desks range from a simple flat top on four legs to a sit-stand desk with a motorised frame, and the tops and legs are often sold separately. That separation is useful, because you can choose a top that fits your room and legs that suit how you work. This guide explains the main ranges and what to check before you buy.
IKEA desks suit anyone who wants a practical workspace at a low price, with the size and height chosen to fit the room. The top and the legs deserve separate attention, because they do different jobs.
Best for
Home offices, study corners and small workspaces.
Anyone who wants a desk in a specific size.
Watch out for
A top that is too deep can dominate a small room.
Check the weight limit if you use heavy equipment.
How IKEA desks are sold
Many IKEA desks are sold as two parts: a top and a set of legs or a frame. The top is a flat panel, usually chipboard with a laminate surface, in a set of sizes. The legs can be simple straight legs, a trestle, a drawer unit or a motorised frame. You choose the top that fits your room, and the legs that suit how you work, and the two are joined with screws and brackets.
The advantage is choice. A wide top with simple legs makes a large desk, and a narrow top with a drawer unit makes a compact one. The drawback is that the choices are yours to make, and a top with legs that do not suit it will wobble or sag. Check that the legs are rated for the size and weight of the top, and that the fixings are tight.
Simple desks
A simple desk is a flat top on four legs, and it is the most common IKEA desk. It suits a laptop, a monitor and a few papers, and it fits in a small room without dominating it. The tops come in a range of sizes, from about 100 centimetres wide to 200 centimetres, and the depth is usually 60 or 80 centimetres. A deeper top gives more room for a monitor and papers, but it takes up more floor space.
The legs matter more than they look. Straight legs are simple and stable, while a trestle gives more leg room but less stability. A drawer unit as a leg gives storage and support in one, but it takes up leg room on one side. If you sit at the desk for hours, leg room matters as much as the size of the top.
Corner desks
A corner desk uses the corner of a room, with two tops joined at an angle, and it gives a large working surface without taking up the middle of the room. It suits a room where the desk needs to fit against two walls, and it suits anyone who uses two monitors or spreads papers out. The corner piece is the part to check: it must be joined properly, and the legs must support the joint, or the top will sag.
Corner desks are harder to move than a simple desk, because they are larger and the parts are joined. Measure the corner before you buy, and check that the desk will fit through the door. A corner desk that fits the room on paper but cannot be carried in is no use.
Sit-stand desks
A sit-stand desk has a motorised frame that raises and lowers the top, so you can work sitting or standing. The frame is bought separately from the top, and the top is chosen to fit the frame. Sit-stand desks suit anyone who sits for long periods and wants to change position during the day, and they suit shared desks, because the height can be adjusted for different users.
The frame is the expensive part, and it is worth checking the weight limit, the speed of adjustment and the noise of the motor. A frame that is rated for a light load will struggle with a heavy monitor and a stack of books. Check the range of heights too, because a frame that does not go low enough or high enough will not suit you. The top should be thick enough to take the fixings without splitting.
A desk is a top and a support, and the two do different jobs. The top gives you room to work, and the legs or frame give you stability.
Small desks and children's desks
Small desks suit a bedroom corner, a hallway or a child's room. They are usually narrower and shallower than a full desk, and they are designed for a laptop and a few books rather than a full office setup. Children's desks are lower and smaller, and they are often adjustable, so the height can be changed as the child grows.
A small desk is not a small version of a large desk: the proportions matter. A narrow top with a deep drawer unit will leave no leg room, and a shallow top with a large monitor will leave the screen too close to your eyes. Measure the equipment you will use, and check that the top is deep enough for it.
Materials and construction
Most IKEA desk tops are chipboard with a laminate surface, which is light, smooth and easy to clean, but it can chip at the edges and it does not like water. Solid wood tops are heavier and more expensive, but they can be sanded and refinished. Metal frames are strong and stable, and they suit a sit-stand desk or a heavy load.
The joints matter. A desk top joined to its legs with a few screws will wobble, while a top with a proper bracket and a crossbar will stay firm. Check the fixings as you assemble the desk, and tighten them after a week of use, because the fixings can settle. Our guide to IKEA assembly explains the process and what to check as you build.
| Feature | Simple desk | Corner desk | Sit-stand desk |
|---|---|---|---|
| Working surface | One straight top | Large, wraps the corner | One straight top, adjustable height |
| Room needed | Small to medium | Corner, medium to large | Small to medium |
| Assembly | Simple, quick | More parts, needs care at the joint | Frame assembly, needs power |
| Suits | General use | Two monitors, large surface | Changing position, shared use |
What to check before buying
Measure the room and the space where the desk will go, and write the measurements down. Decide on the size of the top from what you will put on it, and decide on the legs or frame from how you work. Check the cable management: a desk with a cable tray or a hole for cables will keep the workspace tidy, while a desk without one will leave cables trailing.
Check the chair clearance. Sit at the desk in the showroom and check that your knees fit under the top, and that the chair can slide in and out. Check the weight limit if you use heavy equipment, and check the returns terms before you build, because a desk that has been assembled is harder to return than one still in its flat-pack box.