PAX is IKEA's wardrobe system, and it works in three parts: a frame, doors and an interior, each chosen separately. That separation is the point: you build a wardrobe that fits your wall and your clothes, rather than buying a fixed piece and hoping it suits you. This guide explains how the three parts work together.
PAX suits anyone who wants a wardrobe built to their wall and their storage needs. It takes planning and assembly, and it must be fixed to the wall, but the result is a wardrobe that fits properly.
Best for
Bedrooms where the wardrobe needs to fill a specific wall.
Anyone who wants to choose the interior layout themselves.
Watch out for
The cost adds up, because frame, doors and interior are sold separately.
Frames are built upright, so the ceiling must be high enough.
How the system works
A PAX wardrobe starts with the frame, a tall box with a fixed width, height and depth. You choose how many frames you need and how wide they should be, and you place them side by side to fill the wall. Then you choose the doors, hinged or sliding, and then you choose the interior: shelves, drawers, hanging rails, baskets and organisers. Each part is bought separately, and each part can be changed later without replacing the whole wardrobe.
The system is flexible, but it needs planning. A frame with the wrong width leaves a gap at the side, and an interior with too many shelves and no hanging space is no better than a wardrobe with the wrong size. Plan the frame from the wall, and plan the interior from what you store. The showroom is useful here, because you can see the frames and the interiors together and measure them.
Frame sizes
PAX frames come in a set of widths, heights and depths. The common heights are 201 and 236 centimetres, the common widths are 50, 75 and 100 centimetres, and the depths are usually 35 or 58 centimetres. The deeper frame suits hanging clothes, because a hanger needs about 55 centimetres of depth, while the shallower frame suits folded clothes and shelves.
Frames can be combined to fill a wall. Two 100 centimetre frames make a 200 centimetre wardrobe, and a 75 centimetre frame beside a 50 centimetre frame makes 125 centimetres. Measure the wall and work out which combination fits, allowing a few centimetres of clearance at the sides. A wardrobe that fits exactly is hard to assemble and hard to move, so a small gap is better than none.
Doors
Doors are chosen separately from the frame, and they come in two types: hinged, which swing open, and sliding, which move sideways. Hinged doors are simpler and cheaper, and they give full access to the interior, but they need space in front of the wardrobe to open. Sliding doors save floor space, because they do not swing out, but they only give access to half the wardrobe at a time.
The doors are also where the look is decided. IKEA offers doors in plain colours, wood effects, mirrored finishes and panelled styles. A mirrored door makes a small room feel larger, and a plain door keeps the wardrobe quiet. The doors are bought separately, so you can change them later without replacing the frame or the interior.
The interior
The interior is chosen from shelves, drawers, hanging rails, baskets, shoe racks and organisers, and it is adjustable, so you can move a shelf up or down or add a drawer later. A wardrobe for hanging clothes needs rails and a few shelves, while a wardrobe for folded clothes needs more shelves and drawers. The interior fittings are sold separately, so the cost adds up, and it is worth totalling the frame, the doors and the interior together.
Plan the interior from what you store. Count the hanging items, the folded items and the shoes, and work out how much of each you need. A wardrobe with too many shelves and no hanging space is no better than the reverse. The showroom has examples of interiors, and they are worth studying, because they show how the parts fit together in a real wardrobe.
A PAX wardrobe is built in three decisions: the frame from the wall, the doors from the room, and the interior from what you store.
Building the frame
PAX frames are built flat on the floor, then tilted upright, so the ceiling must be high enough for the tilt. The frames are large and heavy, and building them is a two-person job. Clear the room before you start, and lay the panels out in order, because the instructions are pictorial and the parts look similar. Check that you have all the boxes before you start, because a missing frame is easier to sort out in the store than at home.
The back panel is important: it gives the frame its rigidity, and a frame without a properly fitted back will rack, or lean out of square. Fit the back carefully, and check that the frame is square before you stand it up. Our guide to IKEA assembly explains the process and what to check as you build.
Fixing to the wall
A PAX wardrobe must be fixed to the wall. The fixings are included, but the wall plugs depend on the wall type, and a plasterboard wall needs different fixings from a brick wall. A wardrobe that is not fixed to the wall can tip forward, especially when the doors are open and the drawers are pulled out, so the fixing is not optional. It is the single most important safety step in the whole build.
Check the wall before you drill, and check for pipes and cables. Use a detector if you are unsure, and use the right plugs for the wall. If the wall is plasterboard and you are not confident, ask a professional, because a wardrobe fixed to a plasterboard wall with the wrong fixings is no safer than one that is not fixed at all.
| Feature | Hinged doors | Sliding doors |
|---|---|---|
| Access | Full width, both sides at once | Half the width at a time |
| Floor space | Needs room to swing open | Saves floor space |
| Cost | Simpler, usually cheaper | More complex, usually dearer |
| Care | Hinges need occasional tightening | Tracks need keeping clean |
What to check before buying
Measure the wall, the ceiling and the floor, and write the measurements down. Work out which frame combination fits, and allow a few centimetres of clearance. Decide whether you want hinged or sliding doors, and plan the interior from what you store. Total the cost of the frame, the doors and the interior together, because the parts are sold separately.
Check the delivery and the assembly. A PAX wardrobe is heavy and comes in several boxes, so confirm whether delivery includes carrying it upstairs, and whether you want the assembly service. Check the returns terms before you build, because a wardrobe that has been assembled is harder to return than one still in its flat-pack boxes.