A waterproof mattress protector stops liquid from reaching the mattress, using a thin barrier layer under a soft top. It is the protector to choose when spills are likely, whether from children, pets or a drink in bed. This guide explains how the barrier works, what it feels like, and what to check before you buy.
A waterproof protector is the practical choice when spills are a real risk. Look for a quiet barrier layer and a cotton top, and check the depth fits your mattress.
Best for
Children's beds and guest beds where spills are likely.
Anyone who wants full protection rather than partial.
Watch out for
Cheap barrier layers can feel plasticky and rustle when you move.
High drying heat can damage the barrier, so check the care label.
How the barrier works
A waterproof protector has two parts: a soft top layer that you lie on, and a barrier layer underneath that stops liquid. The barrier is usually a thin film of polyurethane, bonded to the underside of the top layer. Liquid that reaches the top soaks into the fabric, but the film stops it passing through to the mattress. The liquid stays in the protector, which can then be removed and washed.
The barrier is thin, so it does not change the feel of the bed in any major way, but it does affect airflow. A waterproof layer lets less air through than a plain cotton protector, which can make the bed feel slightly warmer. Makers have tried to improve this with breathable films that let vapour through while stopping liquid, and these are worth looking for if you sleep hot.
Waterproof and water-resistant
Waterproof and water-resistant sound similar, but they are different. Waterproof means liquid cannot pass through the barrier, even if it sits on the surface for a while. Water-resistant means the fabric resists light moisture and slows liquid down, but a large spill will eventually get through. For a child's bed or a bed where drinks are common, waterproof is the safer choice.
Water-resistant protectors are quieter and more breathable, because they have no film layer, and they suit beds where spills are unlikely. If you are choosing between the two, think about the risk: a single large spill on a water-resistant protector can still reach the mattress, while a waterproof protector will hold it. Our guide to mattress protectors compares the types side by side.
What it feels like
A waterproof protector feels different from a plain cotton one, though the difference is small in a good protector. The barrier layer can feel slightly plasticky, and some protectors make a faint rustling sound when you move. The top layer matters here: a quilted cotton top feels soft and padded, and it masks the barrier underneath, while a thin, flat top lets you feel the film more directly.
Heat is the other difference. A waterproof layer lets less air through, so the bed can feel slightly warmer. If you sleep hot, look for a protector with a breathable barrier and a cotton top, and use cotton bedding rather than synthetic. The protector will still feel a little warmer than a plain cotton one, but the difference should be small.
Fit and depth
A waterproof protector fits like a fitted sheet, with an elastic edge or a skirt that wraps around the mattress. The size must match the mattress, and the depth must match too. A protector made for a standard mattress may not fit a deep one, and one made for a deep mattress will be loose on a shallow one. Check the depth of your mattress before you buy, and match it to the depth marked on the packaging.
If you use a topper as well, the protector should go over the topper, so it protects both, and the depth must allow for the topper too. A protector that is too small will slip off at the corners, and one that is too large will bunch up under the sheet. Put the protector on, put the sheet over it, and lie on the bed for a few minutes to check the fit.
A waterproof protector does one job: it stops liquid reaching the mattress. Everything else, the top layer, the fit and the feel, is about doing that job quietly.
Washing and care
Most waterproof protectors are machine washable, which is what makes them useful. Wash them on a normal cycle with a mild detergent, and dry them fully before putting them back on the bed. Some protectors should not be tumble dried at a high heat, because the heat can damage the barrier layer and stop it working. Check the care label before you wash, and follow the temperature limits.
Deal with spills quickly, even on a waterproof protector. The barrier stops the liquid reaching the mattress, but the liquid still sits in the top layer, and it is easier to wash out fresh than dried in. Remove the protector, wash it, and let the mattress air for a while before putting the protector back on.
Pros
- Stops spills reaching the mattress
- Machine washable, so the mattress stays clean
- Protects the guarantee, which can be voided by stains
Cons
- Can feel plasticky or rustle when you move
- Lets less air through, so the bed can feel warmer
- High drying heat can damage the barrier
When waterproof is the right choice
Waterproof is the right choice when spills are a real risk. Children's beds, beds shared with pets, and beds where drinks are common are the clear cases. It is also worth considering for a new mattress, because a stain on a mattress can void the guarantee, and a waterproof protector keeps the mattress clean from the start.
Waterproof is less necessary for a single adult in a bed where spills are unlikely. In that case, a water-resistant cotton protector is quieter, cooler and more comfortable, and it still keeps dust and light moisture away from the mattress. The choice is about the risk: if a spill is likely, go waterproof. If it is not, water-resistant is enough.
What to check before buying
Start with the size and the depth, and match them to your mattress. Then check the top layer: a quilted cotton top feels softer and masks the barrier better than a thin, flat top. Check whether the barrier is described as breathable, and whether the protector is quiet when you move on it. Check the care label, and make sure the washing and drying limits suit how you will use it.
Finally, check the fit on the bed. Put the protector on, put the sheet over it, and lie on it for a few minutes. The protector should stay in place, feel comfortable under the sheet, and not make a noise when you move. If it does any of those things badly, try another one. A waterproof protector is a small purchase, but it is one you will use every night.