A chest of drawers is one of the most useful pieces of furniture in a home. It stores folded clothes, bedding and everyday items in a small footprint, and it works in a bedroom, a hallway or a living room. This guide explains the main types, the sizes that matter and how to tell a well made chest from a poor one.
A good chest of drawers suits a room that needs tidy, accessible storage without taking up much floor space. The frame, the drawer runners and the joints matter more than the finish on the front.
Best for
Bedrooms, spare rooms and hallways where folded storage is needed.
Rooms where a low, wide piece fits better than a tall wardrobe.
Watch out for
Thin drawer bases that sag under the weight of folded clothes.
Chests that rock on an uneven floor or tip when a drawer is pulled out.
What a chest of drawers is
A chest of drawers is a freestanding piece of furniture with a stack of drawers set into a frame. The drawers open from the front and slide in and out on runners or grooves, and the top surface can hold a lamp, a mirror or a few everyday items. Unlike a wardrobe, it stores things folded rather than hung, which makes it useful for knitwear, underwear, bedding and general household items.
The basic form has changed very little over the years. A frame holds the drawers, the drawers hold the contents, and the whole piece stands on short legs, a plinth or a solid base. What has changed is the range of sizes and materials, and the quality of the fittings inside.
The main types
The standard chest is the most common form, usually with three to six drawers stacked in one column. It is a good fit for a bedroom, where it sits against a wall and holds a useful amount of clothing. A wide chest spreads the same number of drawers across two columns, which gives a lower, broader shape that works well under a window or in a larger room.
A tallboy is a tall, narrow chest, often with six or more drawers stacked high. It suits a small bedroom or a narrow wall where floor space is tight. A small chest, sometimes called a bedside chest, has two or three drawers and is sized to sit beside a bed or in a hallway. Each type does the same job in a different shape, so the choice comes down to the space available and what needs storing.
| Feature | Standard chest | Tallboy | Wide chest |
|---|---|---|---|
| Shape | Upright, one column | Tall and narrow | Low and broad |
| Drawers | Three to six | Six or more | Six, in two columns |
| Best room | Bedroom | Small bedroom | Large bedroom or living room |
| Floor space | Moderate | Small | Larger |
Sizes and proportions
Most standard chests are between 80 and 120 cm wide, 100 to 130 cm high and 40 to 50 cm deep. The width decides how much fits in each drawer, the height decides how many drawers there are, and the depth decides whether folded clothes sit flat. A chest that is too deep wastes space at the back of each drawer, while one that is too shallow leaves clothes hanging over the front edge.
Measure the space before you buy, and allow room for the drawers to open fully. A drawer needs its full depth of clearance in front of the chest, plus a little extra for your hands.
Drawer construction
The drawer is where quality shows. A well made drawer has sides of solid timber or thick board, a base that sits in a groove rather than being stapled underneath, and a front that is joined to the sides with dovetails or another strong joint. The base should feel firm when you press it, not flex under a light push. Thin hardboard bases are the first thing to fail in a cheap chest.
Drawer runners decide how the drawer moves. Simple wooden grooves are common in traditional chests and work well if the timber is smooth and the fit is right. Metal runners with small wheels or ball bearings give a smoother, quieter action and are common in modern chests. Either type works, provided the drawer sits level and does not drop at the front when it is pulled out. A drawer that tips forward when open is a sign of worn or poorly fitted runners.
Materials and finishes
Solid timber chests are the heaviest and usually the longest lasting, with oak, pine and ash among the common choices. Each timber has its own grain pattern and colour, and solid timber can be repaired and refinished if it is scratched or marked. Veneered board is lighter and more affordable, with a thin layer of real timber over a stable core, and it gives a consistent finish across the whole piece.
Painted finishes suit bedrooms and nurseries, and they hide the grain entirely, which makes them a good choice when the timber underneath is plain. Laminate and foil finishes are the most affordable and the easiest to wipe clean, but they can chip at the edges and are hard to repair.
Pros
- Solid timber lasts well and can be repaired
- Veneered board gives a consistent finish at a lower weight
- Painted finishes suit many rooms and hide plain grain
Cons
- Solid timber is heavy and needs care in damp rooms
- Thin veneer can chip at edges and corners
- Laminate finishes are hard to repair once damaged
Frames, joints and stability
The frame is the skeleton of the chest, and it should feel rigid when you push it gently from the side. A good frame uses mortise and tenon joints or dowelled joints at the corners, with a solid back panel that keeps the whole piece square. A thin back panel held on with a few staples adds little strength, and the chest will start to rack, or twist out of square, over time.
Stability matters most in a tall chest. A tallboy with a narrow base can tip forward if several drawers are open at once, especially on a carpeted floor. Check that the chest sits flat without rocking, and look for a wall fixing strap or bracket, which anchors the top to the wall and stops it tipping.
A chest of drawers is judged by its drawers. If they slide smoothly, sit level and hold their shape under weight, the rest of the piece is usually sound.
Drawers that run well
Open and close every drawer before you decide. Each one should glide out without catching, and it should close with a firm push rather than a slam. Listen for scraping or grinding, which suggests the runners are misaligned or the drawer is out of square. A drawer that sticks halfway out is often swollen with damp, or the frame has twisted slightly since it was made.
Check the fit of each drawer in its opening. The gaps around the front should be even on all sides, and the front should sit flush with the frame when closed. Uneven gaps usually mean the drawer or the frame is out of square, and that is hard to fix. Also lift each drawer out if you can, and look at the underside. A drawer that feels light and flimsy when empty will feel worse when it is full of clothes.
Where a chest fits in the home
The bedroom is the natural home for a chest of drawers, where it holds clothes that are folded rather than hung. It works best on a wall that is clear of doors and radiators, with enough space in front for the drawers to open. In a small bedroom, a tallboy uses the height of the room and leaves more floor free, while in a larger room a wide chest can double as a surface for a television or a mirror.
A chest also works in a hallway, where it holds gloves, scarves and household items, and in a living room, where it stores board games, cables and paperwork. A storage furniture piece chosen for a hallway should be sturdy enough to take daily use and shallow enough not to block the walkway.
What to check before you buy
Start with the drawers, then the frame, then the finish. Open each drawer fully, check that it slides smoothly and sits level, and press the base to test its strength. Push the chest gently from the side to test the frame, and check that it sits flat on the floor without rocking. Look at the joints and the back panel, and ask whether the piece comes with a wall fixing.
Finally, think about what will go inside. Count the drawers you need, measure the depth against the clothes you fold, and check that the top drawer is not so high that it is awkward to reach.