Home / Chests of drawers and storage / Tallboys: What to Check

Tallboys: What to Check

A tallboy is a tall, narrow chest of drawers that stores a lot in a small patch of floor. It suits a small bedroom, a narrow wall or a corner where a wide chest would not fit. This guide explains how tallboys are built, the sizes to expect and the checks that matter most, especially stability.

Summary Verdict

A tallboy suits a small bedroom or a narrow wall where floor space is tight and height is free. Stability is the main concern, so a wall fixing is not optional.

Best for

Small bedrooms and box rooms where a wide chest would not fit.

Storing a lot of folded clothes on a small footprint.

Watch out for

Tipping, especially when several drawers are open at once.

Top drawers that are hard to reach for shorter people.

What a tallboy is

A tallboy is a chest of drawers built upwards rather than outwards. It is narrow, often 60 to 80 cm wide, and tall, often 130 to 160 cm high, with six or more drawers stacked in a single column. The name comes from the shape: a tall boy, as opposed to a low boy, which was the wide, low chest that sat beside it in older homes.

The tallboy works because it uses the height of a room that would otherwise go unused. A bedroom with a narrow free wall can hold a tallboy where a standard chest would be too wide, and the storage gained is real: six or seven drawers hold as much as a wider chest with fewer drawers. The trade is that the top drawers sit high, and the piece is more prone to tipping than a low chest.

Sizes and proportions

Most tallboys are 60 to 80 cm wide, 40 to 50 cm deep and 130 to 160 cm high. The width decides how much fits in each drawer, and the depth decides whether folded clothes sit flat. A tallboy narrower than 60 cm has drawers that are too small for much beyond underwear and socks, while one deeper than 50 cm starts to feel bulky in a small room.

Height is the figure to think about most. A tallboy at 160 cm puts the top drawer at around shoulder height for many people, which is fine for reaching in, but it also means the piece is top heavy when the upper drawers are full. Check the ceiling height too: a tallboy under a sloping ceiling or a low beam needs clearance above it, and a piece that is wedged in looks wrong and is hard to move.

Drawer layout and use

The drawers in a tallboy are usually all the same size, which makes organising simple. The top drawers suit underwear, socks and small items, the middle drawers suit T-shirts and knitwear, and the bottom drawers suit heavier items such as jeans and bedding. Putting the heaviest things at the bottom also helps stability, since the weight sits low in the piece.

Some tallboys have a deeper bottom drawer, which is useful for bulky items such as jumpers or bed linen. Check the depth of each drawer from the inside, and open every drawer to make sure it runs smoothly. A tallboy has more drawers than a standard chest, so there are more runners and joints to check, and a single sticking drawer will be noticed every day.

FeatureTallboyStandard chest
Width60 to 80 cm80 to 120 cm
Height130 to 160 cm100 to 130 cm
DrawersSix or moreThree to six
Floor spaceSmallModerate
Tipping riskHigher, needs wall fixingLower
A tallboy stores a lot on a small footprint, but height is also its weakness. A wall fixing turns a tipping risk into a piece you can trust.

Stability and wall fixing

Stability is the single most important check on a tallboy. The piece is tall and narrow, so its centre of gravity is high, and pulling open a drawer shifts weight forward. If two or three drawers are open at once, a tallboy can tip, especially on carpet. This is not a rare fault: it is a property of the shape, and it is why a wall fixing matters.

A wall fixing is a strap or bracket that anchors the top of the tallboy to the wall behind it. Many tallboys are supplied with one, and it should be fitted as part of setting the piece up, not left in the box. The fixing takes a few minutes to install and needs a solid fixing point in the wall. In a home with small children it is essential, and in any home it is a sensible precaution.

Construction and joints

The frame of a tallboy carries more weight, higher up, than the frame of a low chest, so the joints need to be sound. Look for a solid back panel that keeps the frame square, and check that the piece feels rigid when you push it gently from the side. A tallboy that flexes or twists will only get worse as the drawers are loaded and used.

Drawer runners matter too. Metal runners with ball bearings give a smooth action and hold the drawer level when it is pulled out, which helps on a tall piece where a dropping drawer is awkward to push back in. Wooden grooves work well if they are smooth and the fit is right. Either way, open every drawer fully and check that it does not drop at the front or catch halfway.

Materials and finishes

Solid timber tallboys are the heaviest, which helps stability, and they can be repaired if scratched. Oak and pine are the common choices, with pine the lighter and more affordable of the two. Veneered board gives a smooth, consistent finish and keeps the weight down, which matters when the piece has to be carried upstairs to a bedroom.

Painted tallboys suit small bedrooms well, since a pale finish makes a tall piece feel less imposing. Whatever the finish, check the top surface for marks, since the top of a tallboy is at eye level and any damage shows. Also check the handles, since a tallboy has more of them than a standard chest and loose handles are a common fault.

Where a tallboy fits

A tallboy fits best on a narrow wall in a bedroom, where it uses height that would otherwise be wasted. It also works in a hallway or a landing, where a wide chest would block the walkway, and in a spare room where storage is needed but floor space is short. In each case the key is a wall behind it that can take a fixing.

Avoid placing a tallboy in front of a window, where it blocks light, or beside a radiator, where heat dries the timber and affects the drawer fit. Leave enough space in front for the drawers to open fully, and keep the top drawers within easy reach. A tallboy placed with care will be used every day; one wedged into a corner will be a source of small frustrations.

What to check before you buy

Check the wall fixing first: is one supplied, and can it be fitted to the wall where the tallboy will stand? Then open every drawer, check the runners and press the drawer bases. Push the piece from the side to test the frame, and check that it sits flat without rocking. Measure the height against the ceiling and the width against the wall.

Finally, think about who will use it. If the top drawers are out of comfortable reach, the storage at the top will go unused. A tallboy that fits the room, is fixed to the wall and runs smoothly is a practical piece that earns its place; one bought without those checks can be a hazard as well as a disappointment.