Home / Chests of drawers and storage / How to Choose a Chest of Drawers

How to Choose a Chest of Drawers

Choosing a chest of drawers comes down to three decisions: what needs storing, how much space there is, and how well the piece is made. Get those three right and the chest will be used every day for years. This guide works through each decision in order, so you can choose with confidence rather than guesswork.

Summary Verdict

The right chest is the one that fits the room, holds what you own and runs smoothly. Measure first, check the drawers second, and let the finish come last.

Best for

Anyone who needs tidy folded storage in a bedroom or hallway.

Rooms where a wardrobe would take up too much space.

Watch out for

Buying by looks alone, without opening a drawer.

Forgetting the clearance needed for drawers to open.

Start with what needs storing

Before looking at any chest, make a list of what will go inside it. Folded clothes are the usual contents, but the mix matters: knitwear needs deep drawers, underwear and socks need shallow ones, and bedding needs a wide drawer or a deep bottom drawer. A chest chosen without this list is a guess, and the guess is often wrong.

Count the drawers you need as well as the size. A household with two people sharing a chest will need more drawers than one person, and a chest that holds bedding as well as clothes will need a deeper drawer somewhere in the stack. A chest of drawers with six drawers is not automatically better than one with four: the right number is the one that matches the contents.

Measure the space

Measure the wall where the chest will stand, and measure the height to the ceiling or to any window sill above it. Then measure the clearance in front: a drawer needs its full depth of space to open, plus room for your hands. In a small bedroom this clearance is often the deciding factor, and it is the measurement most often forgotten.

Also check the route the chest will take into the room. A wide chest may not fit through a narrow doorway or up a tight staircase, and a tallboy may not turn on a landing. Measure the doorways and the stairs as well as the final position. A chest that cannot reach its room is no use to anyone.

Choose the type

A standard chest, with three to six drawers in one column, suits most bedrooms. A wide chest, with drawers in two columns, suits a larger room where a low, broad piece fits better. A tallboy suits a narrow wall where floor space is tight and height is free. A small chest suits a corner, a hallway or a position beside a bed.

The type should follow the room, not the other way round. A tallboy in a room with a low ceiling looks wrong, and a wide chest in a small bedroom blocks the walkway. Sketch the room on paper if it helps, and mark where the chest will stand, where the drawers will open and where the doors and radiators are. The right type becomes obvious once the room is drawn out.

DecisionWhat to checkCommon mistake
ContentsList what will go insideGuessing the drawer count
SpaceWall, height and drawer clearanceForgetting the opening space
TypeMatch the shape to the roomChoosing by looks alone
QualityDrawers, frame, back panelJudging by the finish only
Measure the room, list the contents, then choose the chest. A piece bought in the other order is a piece that may not fit the room or the life it has to serve.

Check the drawers

Open every drawer fully. Each one should slide out smoothly, without catching or scraping, and it should sit level when it is pulled out rather than dropping at the front. Push it back in with a firm push: it should close cleanly, not need a slam. Uneven gaps around the drawer front suggest the drawer or the frame is out of square.

Press the base of each drawer to test its strength. A firm base that sits in a groove is a good sign; a thin base that flexes under a light push will sag once it is full of clothes. Look at the height of the drawer sides from the inside, and check that they are deep enough to keep folded items in place. The drawers are the working parts of the chest, so they deserve the most attention.

Check the frame and the back

Push the chest gently from the side and watch for flex or twisting. A good frame feels rigid, with joints that hold the piece square. Look at the back panel: a solid back adds strength and keeps the frame true, while a thin back held on with a few staples adds almost nothing. The back is not a part you see, but it does a lot of the work.

Check that the chest sits flat on the floor without rocking. A piece that rocks will wear its joints unevenly and will feel unstable every time a drawer is opened. If the chest is tall, check whether a wall fixing is supplied, and plan to fit it. A tall chest without a fixing is a risk, not a bargain.

Materials and finish

Solid timber is the most durable choice and can be repaired if scratched. Veneered board is lighter and more affordable, with a consistent finish. Painted finishes suit bedrooms and nurseries, and laminate is easy to wipe clean but hard to repair. The material matters, but it matters less than the frame and the drawers: a well made chest in veneered board will outlast a poorly made chest in solid timber.

Choose the finish for the room it will stand in. A pale finish makes a small bedroom feel larger, a dark finish suits a larger room, and a painted finish is easy to touch up if it is marked. Check the edges and corners for chips, and look inside the drawers: a chest that is finished properly inside as well as outside is a sign of care in the making.

What to do when it arrives

When the chest arrives, check it before it is put in place. Open every drawer again, check the frame, and look for any damage from delivery. If it needs assembly, follow the instructions in order and do not skip the back panel, which is structural, not decorative. Fit any wall fixing before the chest is loaded, since it is harder to reach once the piece is full.

Load the heaviest items into the bottom drawers, where their weight helps stability, and give each drawer a clear job so the chest stays organised. A chest chosen well and set up properly will be used every day, and the hour spent choosing and checking it is repaid many times over.